Close this search box.

DIN100 (60038) 12V100AH DIN SMF CAR Battery

Product Description

Model: DIN100
BRAVA DIN100 (60038, 6-QW-100L-A) DIN series flooded maintenances-free car battery has very good low temperature starting ability,super long shelf life and maintenance free under normal situation.Those batteries are manufactured under DIN technology standard,less electrolyte is consumed,good anti-vibration capacity.It’s good used for car, tractor,mine-truck and the starting,lighting for the construction engineer vehicles,etc.

Voltage : 12v
Capacity : 100Ah
Size : 351*174*188*188mm
Weight : 23.6kg
Terminal : 1


Share This Page

DIN55 Physical Specification (mm)

Model DIN100  (60038)
Nominal Voltage 12V
Nominal Capacity(20HR) 100Ah
Dimension Length 351±2mm(13.82inches)
Width 174±2mm(6.85inches)
Container Height 188±2mm(7.40inches)
Total Height(with Terminal) 188±2mm(7.40inches)
Weight With Acid Approx 23.6Kg(52.0lbs)
Acid 1.280±0.015g/cm (25ºC)
Standard Terminal 1
Cell layout 0
Hold-Down B13
Case Black-Material (PP)
Cover Black-Material (PP)
Handle Black-Material (PP)

Electrical Specification

Rated Capacity @20 hour rate(1.8A) 100Ah
Reserve Capacity (RC) [email protected] 175min
Cold Cranking Amps(CCA) @0 ºF (-18 ºC) 745A(EN)

Standard Terminal (mm)

Terminal Type D
Positive Negative
1 19.5 17.9
DIN100 60038 LAYOUT
DIN100 60038 LAYOUT
DIN100 60038 Discharge Characteristics
DIN100 60038 Discharge Characteristics


Wet Starter SMF Battery DIN Standard Series

FAQ1. How to extend the life of a SMF battery?In order to increase the life of battery, it is necessary to monitor the battery performance constantly. Here are some tips to optimize the battery performance.
1. The SMF battery should be placed in well ventilated area to avoid high temperature environment. With each 10 degree rise in air temperature, the float life reduces to half. If the battery is installed in equipment, it is necessary to isolate it from heat generating components like transformer.
2. In order to prevent deep discharge, it is necessary to set the cut off voltage to 11.5 volts in 12 volt battery and 4.5 in 6 volt battery.
3. It is necessary to prevent no load battery drain. The additional components of the equipment such as sensors, displays and indicators consume power in the no load condition. So if the equipment is not provided with automatic charging, this power loss leads to deep discharge.4. Boost cum float charging is suitable for SMF battery. If the power failure is frequent, the battery should be charged immediately to acquire full charge before the next power failure.

5. If there is any problem such as low backup time, battery heating, low terminal voltage even after continuous charging develops, the battery should be attended immediately.

6. If the equipment is not using for long time, it should be charged once in every week. If the battery is allowed to charge and discharge frequently, its life can be extended to 3-5 years.

2. What’s the SMF Battery?

Sealed Maintenance Free batteries are widely used where minimal maintenance and space requirements are the main considerations. In UPS systems, it is used because of its maintenance free and eco friendly features. SMF batteries do not require water and acid top up and are totally maintenance free. There is no water loss during the charge- discharge cycle and the battery works on the oxygen recombination principle. SMF battery is also called as Valve Regulated Lead Acid or VRLA battery.

CAR Battery: | Automobile | | Truck | | Marine/RV | | Motorcycle |


Type Volt. C20 RC CCA(DIN) Overall Dimensions(mm) Cell Terminal Hold
Handles Wet
(V) (Ah) (Min) (-18℃) L W H TH Layout (Kg)
LN4 58043 12 80 138 427 313.5 174 189 189 0 1 B13 TS1 20.2
LBN5 58815 12 88 154 473 351 175 173 173 0 1 B13 TS6 21.5
LN5 58821 12 88 154 460 351 174 188 188 1 1 B13 TS6 21.7
58827 12 88 154 460 351 174 188 188 0 1 B13 TS6 21.7
59218 12 88 154 460 351 174 188 188 0 1 B13 TS6 21.7
59524 12 95 169 487 351 174 188 188 0 1 B13 TS6 22.2
60038 12 98 175 513 351 174 188 188 0 1 B13 TS6 23


Contact Form Demo (#3)